To be able to connect your Anviz device to TimeXpress, the device serial number and the device ID will be required.
This information can be found on the device itself.
Press the [ M ] on device keyboard, [ Menu ] on high level units, submit the admin information if required, navigate to setup on device menu using the arrows keys, then press [ OK ] to enter on setup menu, now look for System and press [ OK ].
There you should see the Device ID, if need to change Device ID value press [ OK ], then change value, press [ OK ] again to leave the section, press [ C ] to return, device will ask to save or not the changes, press [ OK ] to save or [ C ] to cancel.
Each device must have an unique ID in order to respond to commands.
NOTE
To find device serial on menu, press the [ M ] on device keyboard, [ Menu ] on high level units, submit the admin information if required, navigate to system information on device menu using the arrows keys, then press [ OK ] to enter on system information menu, now look for Serial.
Open TimeXpress, on TimeXpress tabs, looks for Device Management tab abs select, now press the add device button to add your device to TimeXpress and be able to configure to use it.
On the Device Activation Center form, submit the device serial and click validate, if all ok, then close form and move to next step.
Select device from the list, list are located at the left size of the Add Device button, wend select device [ Remove Device ] and [ Configure Device ] buttons will become enabled, click on Configure Device to start the configuration process.
On the configuration form, select the USB option, and change Device ID value to match your Device ID, all other values can be ignored. For device location name, type some text to make reference to this device, could be the place where is going to be, or the Model, or something that will help you know the device you will work with.
Press the Validate Settings button and allow some time for the process to complete, if all ok, you will receive a successful notification, then click on Save Settings, and your device will be ready to be used on TimeXpress.
Share this page: